Description
10g HY 910 Thermal Adhesive / Thermal Adhesive Glue Tube Silicone Heatsink Plaster
One of the best thermal Glue / plasters on the market
Electrically non-conductive , eliminating the risk of short-circuits
Thermal Adhesive is a type of thermally conductive glue used for electronic components, LED lights and heatsinks. Thermal adhesive paste is similar to thermal paste in that it is used for transferring heat from one surface to another. It is commonly used to bond heatsinks to motherboard chipsets and video card processors where there are no mounting holes to clamp a heatsink down. Thermal adhesives are not recommended to be used between a CPU and a heatsink, to which thermal grease is used.
HY910 is designed to significantly enhance the cooling capacity of LED Lights,RAM and VR heatsinks on your CPU and VGA cards with long-lasting and reliable performance. Because it is electrically non-conductive it eliminates the risk of short-circuits and hence ensures your CPU or VGA card is working under a safe environment with rapid dissipation. This is very easy to apply and users can control the amount of application according to their needs. Despite it being an adhesive, removal is as easy as a thermal pad, without leaving residue behind.
Free delivery Australia wide
Features
– Extreme Performance
Ultra low thermal resistance and superior heat conductance maintain the highest level of heat transfer between the heat source and heat sink for maximized cooling performance.
– Convenient Application and Storage
10g toothpaste style easy to use tube provides convenience for storage and is for all applications, including LED lights, computer components such as CPU, GPU and Northbridge Chipset
– High Safety Standards
The composition is dielectric (electrically non-conducting) to prevent electrical hazards and complies with RoHS (restriction of hazardous substances) for the highest level of safety
Specifications
Colour: White
Thermal Conductivity: >0.975 W/m-k
Thermal Impedance: <0.246℃- in2/W
Specific Gravity: >2.0
Viscosity/Flow ability: Non-Flowing
Evaporation: 0.001%
Bleed: 0.05%
Dielenctic Constant: 5.1
Adhesion and tensile strength:2.0 Mpa
Moment Beared Temperature:-50~340℃
Operation Temperature:-30~300℃
One tube is usually sufficient for approximately 50 applications.
Free delivery Australia wide
Package includes
1 x 10g toothpaste style easy to use tube HY910 Heat conducting Thermal Glue